American-made since 1987Since 1987
EnglishEspañol
1-812-776-6727
Request a quote
Partners · Architects & design professionals

Resources for architects and design professionals.

Guide specifications and the technical support a restoration spec needs — in one place, without a login.

Coating detailed around a rooftop curb
Technical support

Tough detail? The technical team can help.

Odd penetrations, ponding that will not drain, a substrate nobody can identify. Send the drawings and photos; a SESCO technical rep works through it with you and comes back with the system and the detail.

Guide specifications

Sections by substrate.

SESCO's guide specifications in CSI three-part format, to download as PDFs, each beside its system page's build-up where one exists. For an editable version, or a section not published here yet, request a draft; it arrives with the supporting TDS.

Guide specification sections
07 56 00Single-ply (TPO / PVC)Guide specification · 5 pagesBuild-up — Si750 Guide Specification — single-ply (TPO / PVC)Download — Si750 Guide Specification — single-ply (TPO / PVC) (opens in a new tab)
07 56 00EPDMGuide specification · 6 pagesBuild-up — Si750 Guide Specification — EPDMDownload — Si750 Guide Specification — EPDM (opens in a new tab)
07 56 00Asphalt BUR and modified bitumenGuide specification · 6 pagesBuild-up — Si750 Guide Specification — asphalt BUR and modified bitumenDownload — Si750 Guide Specification — asphalt BUR and modified bitumen (opens in a new tab)
07 56 00Gravel-surfaced BURGuide specification · 6 pagesBuild-up — Si750 Guide Specification — gravel-surfaced BURDownload — Si750 Guide Specification — gravel-surfaced BUR (opens in a new tab)
07 56 00MetalGuide specification · 6 pagesBuild-up — Si750 Guide Specification — metalDownload — Si750 Guide Specification — metal (opens in a new tab)
07 56 00Structural concreteGuide specification · 5 pagesDownload — Si750 Guide Specification — structural concrete (opens in a new tab)
07 56 00New construction, fully reinforcedGuide specification · 8 pagesDownload — Si750 Guide Specification — new construction, fully reinforced (opens in a new tab)
07 57 00SPF roofing with Si750 topcoatGuide specification · 6 pagesBuild-up — SPF Guide Specification — roofing with Si750 topcoatDownload — SPF Guide Specification — roofing with Si750 topcoat (opens in a new tab)
07 57 00SPF recoatGuide specification · 6 pagesBuild-up — SPF Guide Specification — recoatDownload — SPF Guide Specification — recoat (opens in a new tab)
07 56 00Fluid-Applied Roofing — acrylic restorationPVC · EPDM · mod bit / BURBuild-up — Fluid-Applied Roofing — acrylic restorationRequest draft — Fluid-Applied Roofing — acrylic restoration
Coating brushed along a metal roof seam
Preferred contractor network

The right contractor for your spec.

A preferred contractor installs SESCO systems to the data sheet and keeps the job file — moisture scan, pull test, wet-mil readings. Name the project and the rep pairs you with one in the area.

Aerial view of a coated warehouse roof
System pages

See the build-up in section.

Each system page draws the assembly layer by layer with the SKU on every band, switches between the silicone and acrylic routes, and lists the coverage rule behind each step.

Project profiles

Case studies.

Case studies are on the way.

FAQ

Frequently asked questions.

Do you provide guide specifications?

Yes — three-part, CSI-format sections by substrate, listed above as PDFs to download. For an editable draft, request the section and it arrives with the supporting technical data sheets, so the physical properties and application rates in Part 2 match the product.

Can a coating be specified over an existing membrane?

That is the point of the system. A sound TPO, PVC, EPDM, metal, SPF or modified bitumen roof is cleaned, pull-tested and coated in place. Two conditions rule it out: saturated insulation and a failed deck — a moisture scan tells you which, and wet sections are cut out and replaced before coating.

Who do I contact with a design question?

Call 1-812-776-6727 or send the drawings through the request form. A SESCO technical rep works through the detail with you and comes back with the system, the detail and the documents.

Who to call

Bring your questions to a SESCO professional.

  • Technical team

    Details, substrates, ponding, code questions. A rep works the problem with you.

  • Specification support

    Editable guide-spec drafts by section and substrate, with the data sheets attached.

  • Territory rep

    Someone who knows the area, the distributors and the preferred contractors in it.

  • Documents

    TDS and SDS, no login.